- Altinex introduces of the SC206-204/205 audio signal conditioners. Ideal for eliminating the effects of transmission interference when using single-ended audio signals—such as those commonly transmitted from personal music players or computers via connector formats such as 3.5 mm and RCA—the new Altinex SC206-204/205 audio signal conditioners eliminate noise or interference caused by signal contamination and by variations in ground levels—making them an excellent choice for improving audio quality in presentation systems.
- The Altinex SC206-204 and SC206-205 both use audio filters to reduce noise on single-ended audio signals by recreating the audio signal in a balanced or differential format and by isolating the grounds to eliminate potential ground loops. The SC206-204 is terminated with a male stereo 3.5 mm mini-plug (for source audio) and a female 3.5 mm plug (for loop out) while the SC206-205 is terminated with RCA connectors.
- When used in a presentation system, the new SC206-204 and SC206-205 audio signal conditioners can dramatically enhance the quality of the source audio—eliminating the annoying 60 Hz ‘hum’ that can easily occur when multiple pieces of equipment are not properly grounded. They make a terrific compliment to the Altinex Tilt ‘N Plug line of interconnect boxes. Placed ‘in-line’ between the interconnect box (the point where, for example, a laptop computer is connected into the system) and the audio amplifier/loudspeakers, the SC206-204/205 audio signal conditioners convert the single-ended audio signal to balanced—enabling one’s presentation to have rich, clean audio to support the visuals. Any audio generating device connected to the Altinex interconnect box will be protected.
